01. MOTIONPLUS™ ENGINE TREATMENT

Although friction is an action we cannot see, it causes wear, noise, and high temperatures in engines. MOTION-PLUS™ Engine Treatment reduces friction drastically, thus increasing the engine's life. It contains no solids such as PTFE, silicone, graphite or moly, and also no chlorine.
Can be used in all type of engines, including cars, boats, motorcycles, industrial machinery, two-stroke engines, etc.

02. BENEFITS

+ Reduces friction, engine noise and wear in engines.
+ Reduces fuel consumption.
+ Increases performance, power and engine life.
+ Extends engine life and keeps it running like new.
+ Reduces temperature, maintenance and repair costs.
+ Compatible with all oils (synthetic and petroleum).
+ Can be used with all type of engines that work with diesel or gasoline.
+ Protects your engine during "cold starts".
+ Not lost with oil changes because it bonds on metal parts.
+ For non-commercial engines, add it ounce every four years or 50000 miles.
+ For commercial engines, add it every 2500 hours or ounce a year. (Whichever    comes first).
+ Will not void new car warranties, if used in accordance with vehicle manufacturer's    oil recommendations.
+ The 8-ounce bottle can be used for engines that work with maximun 5 quarts of    oil.
+ For larger oil reserves, add 1.5 Oz. per quart of oil. Complete this formula with    the 4 Oz. MOTION-PLUS™ Transmission Treatment (1.5 Oz. per quart of oil).
+ Protects transmissions, differentials and gear boxes.

03. HOW DOES IT WORK

MOTION-PLUS™ Engine Treatment seals all irregularities and pores produced by metals in contact, thus forming a smooth surface that reduces friction, increases power, reduces temperature, noise, and fuel consumption in engines

04. F.A.Q.

When do you have to add the MOTION-PLUS™ Engine Treatment?
The MOTION-PLUS™ Engine Treatment must be added at your next oil change or maximum with a 500 miles used oil.

What type of oil can be used to add the MOTION-PLUS™ Engine Treatment?
MOTION-PLUS™ Engine Treatment is compatible with all type of oils. You can use synthetic or petroleum oil.

Do you need to add MOTION-PLUS™ Engine Treatment every oil change?
No, the product will bond to metal parts subject to friction, and you will not lose it with the oil change after 50.000 miles (Under regular performance and lubrication).

Why does MOTION-PLUS™ Engine Treatment protect engines against "cold starts"?
When engines haven't run for five hours or longer, oils and additives have drained down to the oil pan. This means we have no lubrication during those seconds. Experts agree that a very high percentage of wear in engines occurs during this period. MOTION-PLUS™ Engine Treatment replaces the normal lubrication temporarily reducing drastically the negative effects of friction on metal parts.

Why does MOTION-PLUS™ Engine Treatment reduce the fuel consumption?
MOTION-PLUS™ Engine Treatment seals all pores and irregularities produced by metals in contact, allowing your vehicle's engine to run smoother and cleaner. This will increase compression in engine and will reduce the fuel consumption.

Is MOTION-PLUS™ Engine Treatment an additive?
It is not an additive because it does not treat the oil to improve it. Its function is to protect metal parts subject to friction. It only bonds on the metal parts that are exposed to friction and wear.

Can I use MOTION-PLUS™ Engine Treatment without oil?
No, MOTION-PLUS™ Engine Treatment will never replace oil. It needs oil to get to the metal parts subject to friction. Besides, oil works as a coolant and lubricates the engine.

After using MOTION-PLUS™ Engine Treatment, is it necessary to change oil?
Yes. You must change oil regularly because MOTION-PLUS™ Engine Treatment does not extend oil's life.

After using MOTION-PLUS™ Engine Treatment, how much time can a motor run without oil?
You must not run an engine without oil. MOTION-PLUS™ Engine Treatment will not cure mechanical failures. Running an engine without oil will increase the engine's problem.

Which is the MOTION-PLUS™ Engine Treatment formula?
It is a secret formula, as the one for Coke. It does not contain solid particles or chlorine.

Where can I use MOTION-PLUS™ Engine Treatment?
You can use MOTION-PLUS™ Engine Treatment on all parts subject to friction, like engines, transmissions, gearboxes, bearings, boat motors, two stroke engines and all type of industrial machinery.

Where can I not use MOTION-PLUS™ Engine Treatment?
The only place that you cannot use MOTION-PLUS™ Engine Treatment is with the brake fluid. The brake system works with friction.

How frequent do I have to use the MOTION-PLUS™ Engine Treatment?
You will have to use MOTION-PLUS™ Engine Treatment every 50.000 miles or every 2.500 working hours. (Under regular performance and lubrication).

Will MOTION-PLUS™ Engine Treatment last for 50.000 miles with a 100% performance?
Its 100% performance will be up to the first 25.000 miles approximately. By then, it will start reducing its performance slowly until it will disappear by 50.000 miles.

Can you add MOTION-PLUS™ Engine Treatment with used oil?
No. The best time to add MOTION-PLUS™ Engine Treatment is at the moment of the oil change. Or maximum with oil that has 500 miles of use. This is because used oil does not work well as the transport agent.

If MOTION-PLUS™ Engine Treatment reduces noise, can it reduce a loud noise in my engine?
MOTION-PLUS™ Engine Treatment will not reduce a loud noise in your engine, because it has not been design to cure mechanical failures. It may reduce some small noises produced by friction.

Which is the temperature that MOTION-PLUS™ Engine Treatment reduces?
There are two types of temperatures inside an engine. Heat produced by friction and heat produced by the fuel explosion. The first one will be the one that MOTION-PLUS™ Engine Treatment controls because our product reduces friction. And friction is heat. We cannot reduce the second temperature because the motor will not work.

05. TESTIMONIALS

We have been selling the Motion-Plus™ products for almost 6 months. Our customers have had great results in their marine engines. Most of the people of our staff and me have used Engine and Transmission Treatments with outstanding results in our own cars.
Julio Castañeda,
MC MARINE

I ran my engine without motor oil for more than half an hour and the Motion-Plus™ Engine Treatment protected my engine from breaking down.
Pablo Suarez,
E & A BODY & MECHANICAL

Motion-Plus™ is the best Engine Treatment I have ever known.
Juan Mucarquer,
QUAKER OIL INC.

A Ford Crown Victoria 4.6L was treated with Motion-Plus™ Engine Treatment. The customer brought the car overheated. It had a water leak. Under regular conditions this problem affects the engine. We checked the engine and found out it was in optimal working conditions. We are sure Motion-Plus™ protected the engine.
Juan Jose Ospina,
Manager ALPHA GARAGE

We added Motion-Plus™ Engine Treatment to a Honda Civic 1989. The owner drove to Orlando. Then, he came back to us to check if the car had an oil leak. We checked the engine and it had no oil, however the engine was in optimal working conditions. We found out that the Engine Treatment protected the engine.
Carlos Alvarez,
President MASTER CARBURETOR